Products
- Home
- Products
Our Products
AW139 CABIN DOOR HANDLE KIT
FEATURES
- Adds fixed center interior door handle to improve door-closing action and increase door-closing force
- Modifies rear mechanical locking mechanism
- Adds additional discrete switch to ensure fully closed door condition is available to pilot
- Kit includes all parts required for both LH and RH doors
- Utilizes standard tools and processes
- No flight limitations
- No impact on emergency egress
- Transport Canada STC SH18-14
- FAA STC SR04310NY
Our Products
AW139 CAMERA ARM MOUNT KIT
The ICARUS Camera Arm Mount Kit allows for safe and secure installation of an externally mounted EO/IR sensor. When installed,
the kit can accommodate EO/IR sensors from 9 inch through 15 inch diameter. The mount includes a quick-disconnect which allows
for easy removal and re-installation of the camera to provide maximum mission flexibility. Each field installable kit comes with all
materials and concise installation instructions for installation.
NOTE: kit can be installed for either left or right side operation.
Specify intended EO/IR turret when ordering to ensure correct quick-disconnect is supplied.
FEATURES
- Field installable in less than 3 hours, requires no special tools
- Designed for most turrets: FLIR, Wescam, Trakka, Cloudcap, Controp etc. (other turrets can be accommodated – enquire for details)
- Max payload weight 100 lbs (can be increased – enquire for details)
- Installed kit Weighs less than 40 lbs
- Turret payload easy to remove and reinstall, using quick-disconnect
- Made from machined aircraft grade aluminum
- No airworthiness limitations (provisions only - additional testing may be required depending on turret)
- Transport Canada serialized STCs available
Our Products
MEDEVAC INFUSION PUMP INSTALLATION KIT
FEATURES
- Single clamp quick release bracket holds 2 Dual Channel BodyGuard 121 pumps, with L/R side brackets for fluid dispensers
- Fits pole diameters 1-1.25”, clamp rotates for either vertical or horizontal orientation
- Can stack multiple brackets on a single pole
- Maintains easy access for power cable;
- Compatible with Ferno, Aerolite, Heli-Mods racks
- No special tools required for installation
- Made from machined aircraft grade aluminum
- No airworthiness limitations
- Transport Canada STC O-LSH19-053D (AW139), O-LSA19-147D (PC-12)
Our Products
AW139 iPAD HOLDER KIT WITH USB CHARGER
FEATURES
- Forward/rear slide mechanism ensures EFB is stowed safely and within comfortable field of view when deployed
- Stowed position does not interfere with view through window, rotor blade camera operation or flight controls
- Self locking stowed position with single hand operated actuator to release into extended/deployed position
- Uses gas strut to ensure solid positioning of swing-out angle
- Three position locking for up/down tilt for best viewing angle
- Includes charging port for user supplied USB charging cable
- No special tools required for installation
- Made from machined aircraft grade aluminum
- No airworthiness limitations – 21G crash loading
- Transport Canada STC O-LSH20-069/D
Our Products
AW139 PILOT & CO-PILOT SEAT RE-UPHOLSTERING
The ICARUS seat re-upholstering service provides an ergonomically designed replacement seating cushion and complete seat cover to
increase cockpit crew efficiency. Superior absorption of engine and rotor vibrations, coupled with high quality materials serve to
increase pilot and co-pilot comfort, effectiveness, alertness and overall operational control. The replacement kit was designed in
accordance with FAR requirement 29.853 and is a cost effective means of ensuring crew discomfort or fatigue are not factors during
normal or extended operations. This service requires the seats to be returned to our facility in Canada where we will provide a nominal
turnaround time of 3 weeks.
NEW: An optional genuine sheepskin top cover provides for additional comfort and its easy removal makes for a personalized seating
configuration whereby crew members can increase their level of virus isolation by using only their own covers.
FEATURES
- Complete replacement of pilot seat dress cover
- High quality leather, providing a durable finish and long lasting repair minimizing the need for maintenance and downtime
- Upgraded adhesion and sewn-in fabric for further pilot comfort minimizing fatigue
- No structural changes to the seat
- Avoids costly OEM repairs or replacement
- Easy to wipe down/disinfect
- OPTION: Additional sheepskin seat top-cover - completely removable and washable. Promotes compliance with COVID19 health and safety initiatives, as well as prolonging the life of the seats. *Available separately*
Our Products
AW139 CABIN STORAGE BIN KIT
FEATURES
- Up to 240lbs storage capacity in 4 compartments
- Items secured using fully adjustable webbed strapping with quick release fasteners and easy tension control
- Fully modular insert can be easily removed for A/C inspections
- Initial installation in less than 90 minutes – no special tools required
- Minor airframe modifications
- No flight limitations
- Transport Canada STC O-LSH19-183/D
Our Products
S-92A OBSERVERS BUBBLE WINDOW
FEATURES
- Provides better than 180 degree viewability
- High quality optical material – no distortions
- Excellent durability & strength against bird/object strike
- Same kit will install on either forward left or aft right side
- Takes 2 - 3 hrs to install - no special tools required (with emergency door removed)
- No impact on Flight into known icing conditions
- No impact on emergency egress
- Transport Canada STC SH19-50
- FAA STC ST09267NY-R
Our Products
KING AIR SEAT REPAIR – (P/N 690-1DR)
NEW: The ICARUS King Air seat repair kit provides replacement seat brackets for the Flight Equipment & Engineering Corporation
OEM seat. OEM seats are known to prematurely develop fatigue cracks over time and render the seat unusable. The ICARUS seat
bracket provides a cost effective and certified option to a complete seat replacement.
FEATURES
- Replacement seat bracket for LH/RH seat part number 690-1DR – forward and aft facing seats
- Replaces OEM bracket P/N 692-100AR3-03 (OEM brackets not available)
- Lightweight aluminum construction provides superior strength and robustness, reduces premature fatigue effects
- Meets 9G requirements for both forward and aft facing installations
- Installs easily without special tools
- No airworthiness limitations
- Approved for Beechcraft B200GT, B200CGT, 300, 300LW, B300, B300C - other aircraft types can easily be added as required – please enquire
- Certified under Transport Canada RDA O-RAP21-019
Our Products
PROPELLE RREPLACEMENT FOR BASLER DC-3
The ICARUS propeller replacement kit enables improved flight performance while reducing operating costs.The kit replaces the aluminum Hartzell blades with the lighter MT carbon composites,which provide better stability, and reduced vibration effects through out the airframe.
FEATURES
- Carbon composite construction blade with wood core
- Reduction in weight of 56 lbs per propeller assembly,112 lbs total resulting in:
- Faster start times,in creased starter life
- Less wear and tear(lower ITT)
- Improves:
- Up to 3% in fuel usage/cost
- Take off and landing Performance
- Smoother thrust application,better ground handling control
- 2.5%g(m/s2) reduction in vibration levels –Improves operation of sensitive payloads (e.g.surveyequipment)
- Transport Canada STCO-LSA20-139D
Maintenance Benefits
- The MT prop has many maintenance benefits over the Hartzell,including:
- TBO increased from 3000 hrs to 4000 hrs
- Unlimited blade life with FOD repairable blades
- Easier to ship,easier in field assembily
- No need to grease the prop
Climb - Hartzell vs. MT - Measured G Forces vs. Time
Our Products
PILOT & CO-PILOT PERSONALISED SEAT COVERS
NEW: The ICARUS personalized seat covers provide an extra layer of comfort together with an additional level of protection for these
difficult times. Maintaining or enhancing your own physical space by ensuring minimized opportunity for viral contamination is
achieved by enabling you to provide distancing from other flight crews using your own seat cover.
This genuine sheepskin top cover provides for additional comfort and its easy removal makes for a personalized seating configuration
whereby crew members can increase their level of virus isolation by using only their own covers.
FEATURES
- Made from genuine sheepskin for super comfort
- Complies with COVID-19 health and other safety protocols in order to allow for full disinfecting and cleaning
- Easy installation and removal means you can take it with you for complete disinfecting / cleaning
- Machine washable to ensure convenience in maintenance and cleanliness
- Can be made to fit most standard seat designs/configurations
- Fits most aircraft types
- Prolongs life of the seat by reducing wear and tear
Our Products
GALLEY INSERT for EMBRAER PHENOM 100
FEATURES
- Adds up to 7 new storage drawers and 2 clear sliding doors
- Lightweight, and operates within OEM placarded allowable weight
- Uses OEM laminate exterior to exactly match existing interior finish
- Stable, self-locking removable drawers can be concealed behind the existing roll-down door
- Maximizes useable galley space
- Installed in less than a day, requiring no special tools
- Can be customized to match configuration of current galley layout
- Optional accommodation of OEM DVD player (if supplied by customer)
- Transport Canada STC SA12-62; FAA STC SA03230NY
- *Can be supplied as a kit or we can perform the installation at our facility if preferred
Our Products
EO/IR MOUNT PROVISIONING KIT for BEECHCRAFT 200/300 SERIES
The ICARUS EO/IR provisioning kit provides a certified structural mount for 15” turrets. The kit can be adapted and certified to
mount other turrets and sensors – please enquire.
ICARUS provides turnkey solutions for ISR integration for most fixed and rotary wing aircraft. We can supply a fully certified ISR
installation including all mission sensors, consoles, computers and controls per customer requirements - please enquire.
FEATURES
- Forward belly mount allows for additional sensor (e.g. radar)
- Lightweight machined aluminum alloy mounting plate
- Approved for Wescam MX-15, FLIR 380 HDc (others can be added)
- Negligible effect on flight performance
- Flight with or without sensor installed
- Installed in less than a day, requiring no special tools*
- Available as a kit or we can install for you
- Approved for B300, B300LW, B200CGT, B200GT, B300C
- Transport Canada STC SA15-29; FAA STC SA03903NY
Our Products
EO/IR MOUNT PROVISIONING KIT for BARON G58
The ICARUS EO/IR provisioning kit provides a certified structural mount for the Wescam MX-10 turret. The kit can be adapted and
certified to mount other turrets – please enquire.
ICARUS provides turnkey solutions for ISR integration for most fixed and rotary wing aircraft. We can supply a fully certified ISR
installation including all mission sensors, consoles, computers and controls per customer requirements - please enquire.
FEATURES
- Belly mounted for full 360 sensor FOV;
- Lightweight machined aluminum alloy mounting plate;
- Minimal structural modifications to airframe – allows for easy conversion back to initial configuration
- Negligible effect on flight performance
- Flight with or without sensor installed
- Installed in less than a day, requiring no special tools*
- Available as a kit or we can install for you
- Transport Canada STC O-LSA18-106/D; FAA STC SA04314NY;